Configure Docker for IPv6
This article describes how to configure docker in order to use IPv6.
Intel iGPU Passthrough using GVT-g on Proxmox
In this blog post I show you how to configure your host so that you can use a virtual Intel iGPU inside your guests on Proxmox.
Proxmox networking setup in a Hetzner data center with IPv6
The article discusses to procedure to enable IPv6 networking on Proxmox on in a Hetzner datacenter.
Proxmox firewall setup
This article shows a minimal configuration for the firewall included in proxmox.
Dev-Log Connect 6 Coding Competition – MiniMax Algorithm
This Post describes the principle behind the MiniMax-Algorithm that will be used to program the Connect6 KI for the Coding Competition.
Dev-Log Connect 6 Coding Competition – First Thoughts
This article discusses some of my thoughts while preparing for the competition and what technique I’ll be using as a basis for my KI.
Proxmox PCIe passthrough
This article shows how to passthrough any PCIe Device to a virtual machine. A GPU is used as an example.
Hosting a Connect6 Coding Competition
This article is about hosting a coding competition where each team develops a KI. In the End all KIs play against each other.
Proxmox networking setup in a Hetzner data center
This article is about the networking setup of proxmox if you only have one IP for your Host. This could be the case if you are hosting in a data center.
Fixing low CPU frequencies on Laptops running Linux
This article points to a solution for poor CPU frequencies on laptops running Linux (specifically of a HP Probook 470 G5).